Anbit Eccentric Drilling Bits 325mm



Anbit Eccentric Drilling Bits Eccentric System For Drilling 325mm


1. When starting drilling, the reamer swings out and reams the pilot-hole wide enough for the casing tube to slide down behind the drill bit assembly.

2. When the required depth is reached, rotation is reversed carefully, whereupon the reamer swings in. Allowing the drill bit assembly to be pulled up through the casing.

3.Casing tubes that are to be left in the drill hole should be sealed at the bottom of the hole by means if cement grout or some other sealing agent.

4.Drilling continues to the desired depth in the bedrock using a conventional drill string.






成为第一个“Anbit Eccentric Drilling Bits 325mm” 的评价者

您的电子邮箱地址不会被公开。 必填项已用*标注