NUMA series down-the-hole drill bits
N125 is a convex-concave surface down-the-hole drill bit. The drill bit has the characteristics of long service life, high drilling efficiency, low-pressure and medium-speed drilling, good gauge effect, wide range of use, and superior cost performance.
N125 drill bit introduction
The N125 down-the-hole drill bit uses high-quality steel and cemented carbide as raw materials. After a special heat treatment process, the button drill bit is achieved by excavating the hard rock of the button bit, and reduces the energy loss during the transmission process. The tooth force is uniform and difficult. Lost teeth and teeth, so the impact energy is concentrated on the rock to achieve high efficiency driving.
N125 down-the-hole drill bit features
Long bit life
The drill bit of this model has a long service life. The drill bit is made of cemented carbide. The wear ratio of this material is more than 10-20 times that of similar products, so the service life is greatly extended.
Wide range of use
It has a wide range of applications. Practice has proved that the bit is suitable for drilling in medium-hard formations such as carbonate rock, limestone, siltstone, and sandstone.
high working efficiency
The drilling efficiency of the drill bit is high, the hard alloy has high hardness and wear resistance, and the drill bit can always remain sharp, thus greatly improving the speed of the tooth.
The drill bit is cost-effective. Because the drill bit has a fast drilling speed and long service life, the number of drilling times is small, and the drilling cost is greatly reduced.
N125 bit technical parameters
N125 drill bit is the best high-pressure down-the-hole drill bit in China. We have exported this bit to many countries and the feedback is very good. You are welcome to contact us if you need it. We can provide all series of drill equipment and drilling tools.