Anbit ND55S no tail tube series hammer
hammer product introduction
The Anbit ND55S hammer adopts advanced drilling theory to design the hammer, which enables the hammer to obtain good energy transmission, so the drilling speed is accelerated, the air consumption is low, the work efficiency is greatly improved, and the use experience is good.
Features of ND55S no tail tube series hammer
1.This hammer adopts the new rock drilling theory to design the internal structure size of the hammer, so that the hammer obtains ideal energy transmission, with large single impact energy, high impact frequency and lower air consumption;
2.This hammer uses few parts, simple structure, and all parts are hardened. Therefore, the hammer has a long working life, fewer failures during use, and convenient repairs and maintenance.
3. Compared with other hammers, this tailpipeless hammer has a higher drilling speed and faster working efficiency.
This type of down-the-hole hammer is used in conjunction with down-the-hole drilling rigs and down-the-hole drill bits, and is mainly used in mining, marble quarry blast hole drilling, water well drilling engineering or drilling engineering construction.
This hammer can provide hardening treatment, effectively extending the life of the hammer itself and reducing the cost of use. The single impact force of the hammer is large, and the power consumption of the broken stone is low.
hammer technical parameters
Application scope of high wind pressure hammer
In actual production, it is recommended to be suitable for drilling various medium-hard and high-hard tough rocks with poor drillability in geotechnical engineering (depending on the type of hammer used). It is widely used in mining, quarry, road construction and other projects such as drilling blast holes, landslide protection, dam site reinforcement, anchoring and other engineering holes, geothermal source air conditioning, hydrology, water well holes and other fields.